Pot Light Installation in Etobicoke
Slim LED pot lights make a kitchen, basement or living room brighter and cleaner looking, and they use a fraction of the power of the old halogen cans. Energo Electric plans the layout with you, installs Liteline slim LED fixtures on Lutron dimmers, files the ESA permit for the new wiring and leaves the ceiling clean. New pot lights cost $135 to $165 each, using Liteline fixtures, for 6 or more new lights (minimum 4). Drywall is cut cleanly. Patching and painting are extra.
Live in The Kingsway? See our Kingsway electrician page for pot lights, panel upgrades and EV chargers in your neighbourhood.


What is included
- A layout planned with you: spacing, dimmer zones and the colour temperature for each room.
- Liteline slim LED fixtures, a Canadian brand, IC rated so they can sit against insulation, with the driver above the ceiling in the same opening.
- Lutron dimmers, or smart switches if you prefer, on each zone.
- New wiring fished through the ceiling with the fewest openings, on a circuit that has the capacity for it.
- The ESA permit filed and the inspection booked for the new wiring, with the certificate for your records.
- Clean up at the end of the day and our 2 year workmanship warranty.
Swapping old pot lights for slim LED
Old halogen or incandescent cans that flicker, run hot or look yellow can usually be swapped for slim LED units through the same openings, with no new holes in the ceiling. A straight swap on existing boxes normally does not need an ESA permit. Tell us how many lights you have and send a photo, and we give you a written price before we start.
Where pot lights work best
- Kitchens: over the counters and the island, not only the centre of the room, on a separate dimmer from the dining area.
- Basements: even spacing across the ceiling, with 3500 K to 4000 K light for a brighter, cleaner look.
- Living rooms and bedrooms: 2700 K to 3000 K warm white on a dimmer, often with a few lights aimed at art or a feature wall.
- Bathrooms: fixtures rated for damp or wet locations over the shower or tub.
- Outside: soffit pot lights for the front of the house and the back porch, on a timer or a smart switch.
Pot light questions
How much do pot lights cost in Etobicoke?
New pot lights cost $135 to $165 each, using Liteline slim LED fixtures, for 6 or more new lights (minimum 4). Drywall is cut cleanly, and patching and painting are extra. Send a photo of the room and you get one written price before we start.
Do pot lights need an ESA permit in Ontario?
Yes. New pot lights mean new wiring, and new wiring needs a permit from the Electrical Safety Authority. Swapping an existing fixture for a similar one usually does not. We file the permit and book the inspection on every job that needs one, and you get the certificate for your records.
Can pot lights go in an insulated ceiling?
Yes. We use IC rated slim LED fixtures that are approved to touch insulation, and the driver sits in the same opening above the ceiling. Where a vapour barrier is in place we seal around the fixture so the ceiling keeps doing its job.
What colour temperature should I choose?
Most Etobicoke homes pick 3000 K warm white for living rooms and bedrooms, and 3500 K to 4000 K for kitchens, basements and garages. Many slim LED models let us set the colour at the fixture before we close up, so you see the options in your own room.
How long does the installation take?
A typical job of 6 to 10 pot lights in a finished ceiling takes one day, including the dimmers and clean up. Open ceilings during a renovation go faster, and larger layouts are quoted with a schedule.
Can you replace my old pot lights without new holes?
Usually yes. Most 4 inch and 6 inch cans can be replaced with slim LED units that cover the same opening, so there is no patching. We confirm it from a photo before we quote.
Choosing the right pot lights
Are LED pot lights dimmable?
Most are, but only with a dimmer made for LED lights. An old dimmer built for incandescent bulbs can make LED pot lights flicker, buzz or not turn fully off. Check that the fixture is marked dimmable and pair it with a dimmer from the fixture maker’s compatibility list. We match the dimmer to the fixture on every job.
What kind of pot lights should I use in a bathroom or shower?
Over a shower or tub, use a fixture marked as suitable for wet locations. In the rest of the bathroom a damp location rating is enough. The rating is printed on the fixture label beside the certification mark. Bathroom pot lights can go on a dimmer like any other room.
How many pot lights do I need for a room?
It depends on the ceiling height, the size of the light and what the room is used for. As a starting point on an 8 foot ceiling, 4 inch lights are often spaced about 4 feet apart and kept about 2 feet off the walls, then adjusted around cabinets, beams and joists. We plan the layout with you before any hole is cut.
Does it matter if there is an attic or a second floor above the ceiling?
Yes, it changes how we run the cable for your pot lights. With an attic above, we can often reach the wiring from the attic, and the lights sit against insulation, so we use IC rated fixtures and seal around them. With a second floor above, we fish the cable through the joist space from below and use slim LED pot lights that fit in tight spaces. Tell us what is above the room when you ask for a price.
