Basement and Second Unit Electrical in Etobicoke
Energo Electric wires basement apartments, second units and multi unit conversions across Etobicoke and The Kingsway. We work out the electrical load, set up the panel or separate service for each unit, wire the kitchen, laundry, lighting and alarms, and handle the ESA permit and inspection. Licensed electrical contractor, ECRA/ESA #7017134, 17 years in the trade, WSIB covered, $2 million liability insurance, 4.9 stars from 153 Google reviews. Call or text (416) 938-0322.

What we do on a second unit
- Load calculation for the whole house, so you know if the existing service can carry a second kitchen and laundry
- Sub panel for the new unit, or a separate meter and panel when you want each unit on its own hydro bill
- 100 to 200 amp service upgrades when the load calls for it, including the utility paperwork
- Kitchen, bathroom and laundry circuits with the GFCI and arc fault protection the Ontario Electrical Safety Code asks for
- Hard wired smoke and carbon monoxide alarms, interconnected as your building permit drawings require
- Pot lights, switches, outlets and bathroom fans, roughed in before drywall or fished into finished ceilings
- ESA permit and inspection on every job
Does a basement apartment need its own electrical panel?
Most second units get their own sub panel inside the unit, fed from the main panel. That way the tenant can reset a breaker without entering your part of the house, and each unit has clearly labelled circuits. A sub panel is not the same as a separate meter. With a sub panel the whole house still gets one hydro bill. If you want a second bill, the unit needs its own meter and its own service, which is a bigger job that involves the utility. We look at the house and tell you which one fits before any work starts.
Will I need a 200 amp upgrade to add a second unit?
Sometimes. A second unit usually adds a range, a fridge, often a washer and dryer, and its own heating or cooling loads. On a 100 amp service that can be too much, especially with electric heat, an EV charger or a hot tub already on the house. We run a load calculation under the Ontario Electrical Safety Code first. If the numbers work, you keep your service and add a sub panel. If they do not, we plan a 200 amp service upgrade and coordinate the disconnect and reconnect with Toronto Hydro. Our guide on 100 amp or 200 amp panels explains the difference.
Do I need an ESA permit for basement apartment wiring?
Yes. In Ontario, new wiring for a basement apartment or second unit needs a notification filed with the Electrical Safety Authority, and the work is inspected. A legal second unit also goes through the city building permit, and the building inspector will ask for the ESA certificate. As a licensed electrical contractor we file the ESA notification, meet the inspector and give you the certificate for your records. More detail is in our guide on ESA permits in Ontario.
Can you wire a basement that is already finished?
Yes. Open framing is the easiest time to wire, so call us before the drywall goes up if you can. In a finished basement we fish cables through ceilings and walls and keep openings as small as the house allows. Patching and painting of any openings is done by your drywall trade, not by us, and we tell you where those openings will be before we start. Old wiring found along the way, such as knob and tube or aluminum branch circuits, gets priced in writing before we touch it.
Splitting a house into two or more units
For duplex, triplex and multiplex conversions we build the new service: a meter bank with one meter per unit, a panel for each unit and a house panel for shared loads like hallway lights and the furnace room. The photo above is a recent Energo multi unit meter service. This work is planned with the utility from the start, so we get involved early, ideally while your designer is still drawing.
Checking an existing basement apartment
How do I know if the electrical in my basement apartment is legal?
Look for the paperwork. Wiring that was done properly was filed with ESA as a notification, inspected and closed with an ESA Certificate of Acceptance. If the last owner has no certificate, treat the wiring as unchecked. A Licensed Electrical Contractor can assess it, correct what is wrong under a new notification and have it inspected, so you hold the certificate for your insurer. More in our guide on ESA permits in Ontario.
Book a visit
We serve Etobicoke, The Kingsway and nearby Toronto and Vaughan neighbourhoods, Monday to Friday 7 am to 7 pm. Call or text (416) 938-0322 or use the contact page. You get a written price before work starts and a 2 year workmanship warranty on our labour. Related services: house rewiring, residential electrical and EV charger installation.
